Cannabis Oil Dispensing Products
Our dispensing products are a great way to fill cartridges and dispense oils. We offer traditional manual dispensing options, plus pneumatic dispensing options that provide ergonomic relief and greater efficiency. Below are some of our most popular items that are used in the industry, as well as videos demonstrating how our products work. Please contact us for more information.
Touchscreen Programmable Shot Meter
$ 820.00
Jensen Global’s touchscreen digital fluid dispenser allows for reproducible deposits of a wide range of thin or viscous materials such as solder pastes, masks, adhesives, epoxies, RTV’s, silicones, cyanoacrylates, paints, inks, oils, lubricants, solvents and more. It is excellent for use with pre-filled syringes of material or when loading empty syringes.
Included: foot switch, power supply, 3, 5, 10, 30/50 cc air syringe adapters, 3, 5, 10, & 30 cc air syringe barrels with stoppers, syringe stand with a material catch and a small variety pack of needles. Finger switches can be used as an alternative actuator to the foot switch.
For features and spec information please click here: BROCHURE.
To view the JGD500T manual please click here: DIRECTIONS.
View full product details
Digital Dispenser Shot Meter
$ 584.00
Jensen Global’s bench top digital fluid dispenser allows for reproducible deposits of a wide range of thin or viscous materials such as solder pastes, masks, adhesives, epoxies, RTV’s, silicones, cyanoacrylates, paints, inks, oils, lubricants, solvents and more. This dispenser has 2 modes of operation, manual & auto. The manual mode allows for dispensing at the operators discretion while the auto mode allows the user to set a specific time for dispensing material. It is excellent for use with pre-filled syringes of material or when loading empty syringes.
Included: foot switch, power supply, 3, 5, 10, 30/50 cc air syringe adapters, 3, 5, 10, & 30 cc air syringe barrels with stoppers, a syringe stand with a material catch and a small variety pack of needles. Finger switches can be used as an alternative actuator to the foot switch.
For features and spec information please click here: BROCHURE.
To view the JGD400S manual please click here: DIRECTIONS.
View full product details
Parts
$ 29.40
Our dispensing systems provide optimal fluid dispensing control and accuracy. We provide the tools and resources to handle your specific dispensing requirements. View full product details
XP-Series Syringe Adapter
$ 28.00
The New XP-Series purple syringe adapters are specifically designed with an O-Ring seal to fit all Jensen Global air syringes. It uses a 5/32” air line that press-fits to the head.
View full product details
Premium 50 CC Air Syringe & Stopper Kit
$ 61.40
Premium air syringe barrels are manufactured with the highest quality standards for the best performance, reduced material waste, and provide ergonomic relief. We package these clear barrels with a white polyethylene stopper for most dispensing applications. However, several other options are available which include an orange straight-wall stopper for high viscosity material, a red stopper for low viscosity materials, or a tan plastic stopper designed specifically for materials containing air pockets. These kits come in boxes with 15 air barrels and stoppers. View full product details
50 cc Air Syringe & Stopper Kit
$ 37.00
Air syringe barrels are manufactured with a heavy flange and are custom designed to withstand pressure. The barrels come in clear, UV amber, UV black opaque and ESD. We package these with a white polyethylene stopper for drip-free dispensing. However, several other options are available which include a red straight-wall stopper for high viscosity material, a red thermal stopper for low viscosity materials, or a blue plastic stopper designed specifically to reduce back pressure when dispensing cyanoacrylates. These items come in boxes of 15.
View full product details
100 CC Manual Assembled Syringe
$ 25.40
This 100 cc syringe consists of a calibrated barrel, stopper, and plunger for manual deposit of materials. Assembled manual syringe components are ready to use and work with all Jensen Global dispensing tips. The size of the syringe is measured in cc’s or ml's. Available in a bag of 5 syringes.
SKU: JG100CC-LL-5
View full product details
50 cc Manual Assembled Syringe
$ 14.00
This 50 cc syringe consists of a barrel, stopper, and plunger for manual deposit of materials. Assembled manual syringe components are ready to use and work with all Jensen Global dispensing tips. The size of the syringe is measured in cc’s or ml's and we offer them with or without print (calibrations).
View full product details
1 cc Manual Assembled Syringe
$ 48.00
This 1 cc syringe consists of a barrel, stopper, and plunger for manual deposit of materials. Assembled manual syringe components are ready to use and work with all Jensen Global dispensing tips. The size of the syringe is measured in cc’s or ml's and we offer them with or without print (calibrations).
View full product details
Luer Lock Tip Caps
$ 3.90
Luer Lock tip caps connect to all syringe tips in place of a dispensing tip, and come in several different colors. These caps are designed to keep material inside the syringe from curing and drying.
View full product details
Blue Luer Lock Tip Cap
$ 13.20
The Blue Luer Lock tip caps connect to all syringe tips in place of a dispensing tip and allow the syringe to stay upright or vertical. This tip cap is available in bags of 50.
View full product details
14 Gauge IT Series Dispensing Tip
$ 16.60
Olive colored Luer Lock hub with a 14 gauge blunt tip. The opening has an Inside Diameter of 0.069” (1.753 mm) and an Outside Diameter of 0.083” (2.108 mm). It features a polypropylene double-helix threaded hub with a UV-bonded 304 stainless steel cannula. Available in boxes of 50 or bags of 1000.
- Gauge: 14
- Color: Olive
- ID: 0.069" (1.753 mm)
- OD: 0.083" (2.108 mm)
14 Gauge IT Series Angled Dispensing Tip
$ 31.60
The IT Series angled dispensing tips feature a polypropylene Luer Lock hub with a UV-bonded 304 stainless steel cannula angled at 45 or 90 degrees. The bend is made at 3/16” (4.763 mm) from the tip for 0.5”, at 1/4” (6.350 mm) for 1.0”, and at 5/16” (7.948 mm) for 1.5” long tips. This series provides an economical solution for most dispensing applications and is color coded based on the international standard. Available in boxes of 50 or bags of 1000.
0.5" 90 degree angled tips are not available in 14 gauge.
- Gauge: 14
- Color: Olive
- ID: 0.069" (1.753 mm)
- OD: 0.083" (2.108 mm)
15 Gauge IT Series Dispensing Tip
$ 16.60
Orange colored Luer Lock hub with a 15 gauge blunt tip. The opening has an Inside Diameter of 0.059” (1.499 mm) and an Outside Diameter of 0.072” (1.829 mm). It features a polypropylene double-helix threaded hub with a UV-bonded 304 stainless steel cannula. Available in boxes of 50 or bags of 1000.
- Gauge: 15
- Color: Orange
- ID: 0.059" (1.499 mm)
- OD: 0.072" (1.829 mm)
15 Gauge IT Series Angled Dispensing Tip
$ 31.60
The IT Series angled dispensing tips feature a polypropylene Luer Lock hub with a UV-bonded 304 stainless steel cannula angled at 45 or 90 degrees. The bend is made at 3/16” (4.763 mm) from the tip for 0.5”, at 1/4” (6.350 mm) for 1.0”, and at 5/16” (7.948 mm) for 1.5” long tips. This series provides an economical solution for most dispensing applications and is color coded based on the international standard. Available in boxes of 50 or bags of 1000.
0.5" 90 degree angled tips are not available in 15 gauge.
- Gauge: 15
- Color: Orange
- ID: 0.059" (1.498 mm)
- OD: 0.072" (1.828 mm)
16 Gauge IT Series Dispensing Tip
$ 16.60
Purple colored Luer Lock hub with a 16 gauge blunt tip. The opening has an Inside Diameter of 0.053” (1.346 mm) and an Outside Diameter of 0.065” (1.651 mm). It features a polypropylene double-helix threaded hub with a UV-bonded 304 stainless steel cannula. Available in boxes of 50 or bags of 1000.
- Gauge: 16
- Color: Purple
- ID: 0.053" (1.346 mm)
- OD: 0.065" (1.651 mm)
16 Gauge IT Series Angled Dispensing Tip
$ 31.60
The IT Series angled dispensing tips feature a polypropylene Luer Lock hub with a UV-bonded 304 stainless steel cannula angled at 45 or 90 degrees. The bend is made at 3/16” (4.763 mm) from the tip for 0.5”, at 1/4” (6.350 mm) for 1.0”, and at 5/16” (7.948 mm) for 1.5” long tips. This series provides an economical solution for most dispensing applications and is color coded based on the international standard. Available in boxes of 50 or bags of 1000.
- Gauge: 16
- Color: Purple
- ID: 0.053" (1.346 mm)
- OD: 0.065" (1.651 mm)
17 Gauge IT Series Dispensing Tip
$ 11.20
White colored Luer Lock hub with a 17 gauge blunt tip. The opening has an Inside Diameter of 0.048” (1.219 mm) and an Outside Diameter of 0.058” (1.473 mm). It features a polypropylene double-helix threaded hub with a UV-bonded 304 stainless steel cannula. Available in boxes of 50 or bags of 1000.
- Gauge: 17
- Color: White
- ID: 0.048" (1.219 mm)
- OD: 0.058" (1.473 mm)
17 Gauge IT Series Angled Dispensing Tip
$ 31.60
The IT Series angled dispensing tips feature a polypropylene Luer Lock hub with a UV-bonded 304 stainless steel cannula angled at 45 or 90 degrees. The bend is made at 3/16” (4.763 mm) from the tip for 0.5” at 1/4” (6.350 mm) for 1.0”, and at 5/16” (7.948 mm) for 1.5” long tips. This series provides an economical solution for most dispensing applications and is color coded based on the international standard. Available in boxes of 50 or bags of 1000.
- Gauge: 17
- Color: White
- ID: 0.048" (1.219 mm)
- OD: 0.058" (1.473 mm)
18 Gauge IT Series Dispensing Tip
$ 11.20
Pink colored Luer Lock hub with a 18 gauge blunt tip. The opening has an Inside Diameter of 0.038” (0.965 mm) and an Outside Diameter of 0.049” (1.245 mm). It features a polypropylene double-helix threaded hub with a UV-bonded 304 stainless steel cannula. Available in boxes of 50 or bags of 1000.
- Gauge: 18
- Color: Pink
- ID: 0.038" (0.965 mm)
- OD: 0.049" (1.245 mm)
18 Gauge IT Series Angled Dispensing Tip
$ 31.60
The IT Series angled dispensing tips feature a polypropylene Luer Lock hub with a UV-bonded 304 stainless steel cannula angled at 45 or 90 degrees. The bend is made at 3/16” (4.763 mm) from the tip for 0.5” at 1/4” (6.350 mm) for 1.0”, and at 5/16” (7.948 mm) for 1.5” long tips. This series provides an economical solution for most dispensing applications and is color coded based on the international standard. Available in boxes of 50 or bags of 1000.
- Gauge: 18
- Color: Pink
- ID: 0.038" (0.965 mm)
- OD: 0.049" (1.245 mm)
