Bottle & Cap Cab 1

22 Gauge NT Premium Series Angled Dispensing Tip

$ 36.20

NT Series premium dispensing tips are manufactured using the highest quality standards and are angled at 45 or 90 degrees. The bend is made at 3/16” (4.763 mm) from the tip for 0.5”, at 1/4” (6.350 mm) for 1.0”, and at 5/16” (7.948 mm) for 1.5” long tips. The polished cannula and burr-free design provide the user accuracy and durability. With a polypropylene hub and 304 stainless steel cannula, our NT series tips provide the smoothest flow for precise dispensing applications.  Available in boxes of 50 or bags of 1000.

• Gauge: 22 
• Color: Blue
• ID: 0.016" (0.410 mm)
• OD: 0.027" (0.710 mm)

Kits

$ 11.30

These starter kits include samples of a wide variety of tips and syringes to allow you to select the appropriate products that work best for your dispensing application.  

- Mini kits contain approximately 50 tips

- Small kits contain approximately 130 tips

- Large kits contain approximately 500 tips

 VIEW KIT CONTENTS HERE

Luer Lock Tip Caps

$ 4.10

Luer Lock tip caps connect to all syringe tips in place of a dispensing tip, and come in several different colors. These caps are designed to keep material inside the syringe from curing and drying.

Touchscreen Programmable Shot Meter

$ 870.00

Jensen Global’s touchscreen digital fluid dispenser allows for reproducible deposits of a wide range of thin or viscous materials such as solder pastes, masks, adhesives, epoxies, RTV’s, silicones, cyanoacrylates, paints, inks, oils, lubricants, solvents and more. It is excellent for use with pre-filled syringes of material or when loading empty syringes.

Included: foot switch, power supply, 3, 5, 10, 30/50 cc air syringe adapters, 3, 5, 10, & 30 cc air syringe barrels with stoppers, syringe stand with a material catch and a small variety pack of needles.  Finger switches can be used as an alternative actuator to the foot switch.

For features and spec information please click here: BROCHURE.

To view the JGD500T manual please click here: DIRECTIONS.

Touchscreen Programmable Shot Meter - BIO

$ 1,182.00

This unit for BIO is a modified dispenser that comes with;

- Special software modified for Manual Start Stop- one mode only

- 0-15 psi regulator

- 0-15 psi gauge with 0.5 PSI increments

- 1/8npt female bulkhead fitting on front of unit for Air Out

- 1/8npt male thread to push to connect (6mm) with 6 ft of 6mm od tubing

- No vacuum venturi

- 6 ea 3cc modified syringe adapters with 6 ft special soft PVC tubing per adapter 

Manifold:

- Special Black 6 station manifold, with 6 flow control valves and hex plug

- 1/4 to 1/8 npt reducing adapter brass

- 1/4 npt connector adapter hex- 1 7/16 long SS

Jensen Global’s touchscreen digital fluid dispenser allows for reproducible deposits of a wide range of thin or viscous materials such as solder pastes, masks, adhesives, epoxies, RTV’s, silicones, cyanoacrylates, paints, inks, oils, lubricants, solvents and more. It is excellent for use with pre-filled syringes of material or when loading empty syringes.

Included: foot switch, power supply (no syringe adapters or syringes included).  Finger switches can be used as an alternative actuator to the foot switch.

For features and spec information please click HERE.

JGD500T-BIO