ALL

Touchscreen Programmable Shot Meter - BIO

$ 1,218.00

This unit for BIO is a modified dispenser that comes with;

- Special software modified for Manual Start Stop- one mode only

- 0-15 psi regulator

- 0-15 psi gauge with 0.5 PSI increments

- 1/8npt female bulkhead fitting on front of unit for Air Out

- 1/8npt male thread to push to connect (6mm) with 6 ft of 6mm od tubing

- No vacuum venturi

- 6 ea 3cc modified syringe adapters with 6 ft special soft PVC tubing per adapter 

Manifold:

- Special Black 6 station manifold, with 6 flow control valves and hex plug

- 1/4 to 1/8 npt reducing adapter brass

- 1/4 npt connector adapter hex- 1 7/16 long SS

Jensen Global’s touchscreen digital fluid dispenser allows for reproducible deposits of a wide range of thin or viscous materials such as solder pastes, masks, adhesives, epoxies, RTV’s, silicones, cyanoacrylates, paints, inks, oils, lubricants, solvents and more. It is excellent for use with pre-filled syringes of material or when loading empty syringes.

Included: foot switch, power supply (no syringe adapters or syringes included).  Finger switches can be used as an alternative actuator to the foot switch.

For features and spec information please click HERE.

JGD500T-BIO

Tubing

$ 0.80

We offer a variety of material or air tubing that has an OD of either 1/4" or 5/32". If you need to replace syringe adapter tubing, our X-series adapters use 1/4" clear air tubing and our XP-series adapters use 5/32" clear air tubing. If you need extra material line instead of air, we have clear or green tubing available. The replacement tubing for our pinch wand JGDMPW would be the 1/4" red silicone tubing. Tubing is sold per foot and comes coiled in a bag.

Universal Syringe Adapter

$ 52.80

Universal adapters are designed to accept a variety of air syringes and use a locking gasket mechanism to provide a tight seal. Although some pictures show the adapter heads only, each adapter comes with 6 feet of 5/32" tubing and your choice of either a black barb fitting (fits most dispensers) or a white QC fitting which fits our JGD500T, JGD400S, JGD350S, JGD150S, and JGD150STS dispensing controllers.

Vacuum Pickup Wand for Efficient Component Handling

$ 149.80

The Vacuum Pickup Wand is an advanced tool designed for efficient and precise component handling. It features a built-in venturi within the handle, allowing it to connect directly to an air source, such as the JGD500T shot meter. This vacuum wand operates whisper-quietly, enabling you to pick up components quickly and easily.

The wand comes with two angled tips and three suction cups, providing versatility for different applications. The unit measures 5.25" (133.4 mm) in length and has a diameter of 0.48” (12.19 mm), making it compact and easy to handle.

Choose the Vacuum Pickup Wand for reliable, quiet, and precise component handling in your industrial operations.

- SKU: JGD301

Vacuum Pullback Assembly

$ 8.00

Vacuum Pullback assembly for Jensen Global dispensing units JGD500T, JGD400S, and JGD350S. 

Note: This assembly is made from three components. Please make sure to add all three items from the drop down to receive the full assembly.  

Vape Starter Kit V2

$ 18.10

This bottle and blunt tipped needle set are perfect for the at-home vapers. The extended length needles allow precision filling of vape cartridges without the hassle of spilling your e-juice. When mix your own juice and flavors you can control your PG/VG to exactly the way you like and mix in more or less nicotine (if applicable). You will be saving money in no time when you start buying your ingredients in bulk and creating your own unique e-juice flavors.

This kit comes with 3 empty 2 oz bottles, different colored caps for easy material identification, 3 tips at 1.5" long with 3 in each size, 3 scabbard covers, and 3 white closed caps for storage.

X-Series Syringe Adapter

$ 32.23

X-Series black syringe adapters are specifically designed with an O-ring seal to fit all Jensen Global air syringes. It uses a 1/4” air line, secured with a clamp. Our X-Series syringe adapters are available with either a black barb fitting (fits most dispensers) or a white QC fitting which fits our JGD500T, JGD400S, JGD350S, JGD150S, and JGD150STS dispensing controllers.

XP Series Syringe Adapter Quick Connect Fitting

$ 10.05

XP-Series Syringe Adapter

$ 31.75

The New XP-Series purple syringe adapters are specifically designed with an O-Ring seal to fit all Jensen Global air syringes.  It uses a 5/32” air line that press-fits to the head. Our XP-Series syringe adapters are available with either a black barb fitting (fits most dispensers) or a white QC fitting which fits our JGD500T, JGD400S, JGD350S, JGD150S, and JGD150STS dispensing controllers.