Air Syringe 2 CAB

22 Gauge Polypropylene Dispensing Tip

$ 57.20

Our flexible Polypro dispensing tips are manufactured with white polypropylene tubing.  Best used in applications that need scratch-free results or the ability to insert the dispensing tip into a curved or problematic area. They can be cut to a customized length or to remove parts of the tip that have become difficult to use due to curing. Excellent when used with many adhesives including cyanoacrylates, anaerobics, or other quick curing adhesives.  Available in boxes of 50 or bags of 1000.

• Gauge: 22 
• Color: Blue
• ID: 0.016" (0.406 mm)
• OD: 0.035" (0.889 mm)

Foot Valve Syringe Dispenser

$ 344.00

A purely pneumatic valve pedal that includes a built-in regulator and gauge to control the flow of material, and a simple step-to-activate design built inside a protective housing. The back of the unit has a 1/4" female thread with a standard male quick connect included. The foot pedal has a syringe adapter inlet port built-in to fit standard 1/4" OD tubing plus a reducer adapter to accept 5/32" OD tubing. 

The JGDFV25V is offered with a built-in vacuum venturi regulator which allows pullback of material into the dispensing tip, reducing dripping and stringing of the material. It has all the same features of the JGDFV25 plus the vacuum feature. 

For features and spec information please click here: BROCHURE. 

To view the Foot Valve Syringe Dispenser manual please click here: DIRECTIONS.

Touchscreen Programmable Shot Meter

$ 870.00

Jensen Global’s touchscreen digital fluid dispenser allows for reproducible deposits of a wide range of thin or viscous materials such as solder pastes, masks, adhesives, epoxies, RTV’s, silicones, cyanoacrylates, paints, inks, oils, lubricants, solvents and more. It is excellent for use with pre-filled syringes of material or when loading empty syringes.

Included: foot switch, power supply, 3, 5, 10, 30/50 cc air syringe adapters, 3, 5, 10, & 30 cc air syringe barrels with stoppers, syringe stand with a material catch and a small variety pack of needles.  Finger switches can be used as an alternative actuator to the foot switch.

For features and spec information please click here: BROCHURE.

To view the JGD500T manual please click here: DIRECTIONS.

Touchscreen Programmable Shot Meter - BIO

$ 1,182.00

This unit for BIO is a modified dispenser that comes with;

- Special software modified for Manual Start Stop- one mode only

- 0-15 psi regulator

- 0-15 psi gauge with 0.5 PSI increments

- 1/8npt female bulkhead fitting on front of unit for Air Out

- 1/8npt male thread to push to connect (6mm) with 6 ft of 6mm od tubing

- No vacuum venturi

- 6 ea 3cc modified syringe adapters with 6 ft special soft PVC tubing per adapter 

Manifold:

- Special Black 6 station manifold, with 6 flow control valves and hex plug

- 1/4 to 1/8 npt reducing adapter brass

- 1/4 npt connector adapter hex- 1 7/16 long SS

Jensen Global’s touchscreen digital fluid dispenser allows for reproducible deposits of a wide range of thin or viscous materials such as solder pastes, masks, adhesives, epoxies, RTV’s, silicones, cyanoacrylates, paints, inks, oils, lubricants, solvents and more. It is excellent for use with pre-filled syringes of material or when loading empty syringes.

Included: foot switch, power supply (no syringe adapters or syringes included).  Finger switches can be used as an alternative actuator to the foot switch.

For features and spec information please click HERE.

JGD500T-BIO

XP-Series Syringe Adapter

$ 29.80

The New XP-Series purple syringe adapters are specifically designed with an O-Ring seal to fit all Jensen Global air syringes.  It uses a 5/32” air line that press-fits to the head.